Engine carbon, chassis rust, and sticky interior grime are the three jobs most workshops dread. Sand blasting damages surfaces, water washing leaves a mess, and chemical cleaners are slow and risky. A dry ice blasting machine for automotive use solves all three without water, grit, or residue. YG builds 5 compact dry ice blasters — from the 9kg YGMINI to the 65kg YGP8S — all running on standard AC220V. Here’s how they work, and which model fits your shop best.
Get a Automotive Dry Ice Blasting Machine Quote
Dry Ice Blasting Machine Specifications
| Model | YGMINI | YGP7X(hot-sale) | YGA625 | YGT6 | YGP8S |
| Motor power | 42W | ＜500W | 750W | 0.36KW | 750W |
| Voltage | AC220V/50-60HZ | AC220V, 50-60HZ | AC220V, 50-60HZ | AC220V/50-60HZ | AC220V, 50-60HZ |
| Air consumption | 0-2m³/min | 28-106 CFM (0.8-3.0m³/min) adjustable | 106-283CFM (3-8m3/min)(adjustable) | 28-141CFM (0.8-4.0m³min) | 3-8m³/min(adjustable) |
| Air supply pressure | 0.1-0.9Mpa | 0-1.6Mpa | 0.1-0.8Mpa (1-8bar Adjustable) | 0.2-1.6Mpa | |
| Ice delivery speed | Particle spray rate: 0.01-0.13 kg/min; Powder spray rate: 0.01-0.08 kg/min | 0-0.75kg/min(adjustable) | 0-7.9 Ibs/min (0-3.6Kg/min)(adjustable) | 0-1.2 lbs/min (0-0.55Kg/min)Adjustable | 0-3.6kg/min(adjustable) |
| Hopper capacity | 3.2Kg | 10.5kg (23.5 lbs) | 25kg | Max. 22lbs(Max. 10Kg) | 25kg |
| Hopper size | 0.3m³ | ||||
| Degree of protection | IP54 | IP54 | IP52 | IP54 | |
| Machine weight | 9Kg | 55kg | 65kg | 121lbs(55Kg) | 65kg |
| Dry ice state | 2.5-3mm (granular) | 2.5-3mm | 2.5-3mm, granular | 120*120*250mm(about 5KG)/150*150*300mm(about 10KG) | 2.5-3mm, granular |
| Drive mode | Direct link | Direct connection | Direct link | Direct link(Dual motors drive the cutter and rollers independently) | Permanent magnet synchronous |
| Machine size | 310*185*320mm | 510*460*960mm | 440*680*80mm | 640*400*580 |
Note: Hopper size is 0.3m³ (standard). The YGMINI is the only handheld unit.
Get a Automotive Dry Ice Blasting Machine Quote
How Dry Ice Blasting for Cars Works
Dry ice blasting for cars uses no water, sand, or chemicals — just frozen CO2 pellets fired at high speed.
Step 1 — Ice Feed. Dry ice pellets (2.5-3mm) drop from the hopper into the air stream.
Step 2 — Acceleration. Compressed air pushes the pellets through the hose at high velocity.
Step 3 — Thermal Shock. At -78.5°C, the pellets freeze the surface layer, making dirt brittle.
Step 4 — Kinetic Impact. The pellets shear off carbon, rust, and grime without cutting the base material.
Step 5 — Sublimation. The pellets turn straight into gas — no residue, no water.
Here’s how it compares:
| Method | Leaves Residue? | Safe on Paint? | Dry Process? |
| Dry ice blasting | No | Yes | Yes |
| Sand blasting | Yes (grit) | No | Yes |
| Water washing | Yes (water) | Yes | No |
YG Dry Ice Blasting Machine Features & Advantages
1. 9kg Handheld to 65kg Trolley
The YGMINI weighs just 9kg — one hand, one hose. Bigger jobs use the trolley-mounted YGP7X, YGA625, YGT6, or YGP8S.
2. Adjustable Ice Feed up to 3.6kg/min
From a gentle 0.01 kg/min powder spray for delicate trim to a full 3.6kg/min for heavy chassis rust.
3. IP54 Sealed Construction
IP54 sealing means it survives a busy workshop and cleans wet or dry.
4. No Secondary Cleanup
Dry ice turns to gas on contact — no grit, no water, no solvent to clean up.
5. Runs on Standard AC220V
Plug into a normal wall socket — no special wiring, no three-phase supply.
Get a Automotive Dry Ice Blasting Machine Quote
Automotive Dry Ice Blasting Applications
Automotive dry ice blasting covers almost every cleaning job in a modern workshop.
- Engine bays — strip carbon, oil, and grease without dismantling
- Chassis and underbody — remove rust and road salt
- Interiors — lift stains from seats and carpets
- Paint and trim — strip glue, wax, and stickers
- Welding and molds — clear spatter, clean tooling
- EV battery compartments — dry clean where water is not allowed
Works on assembled cars — no teardown, no drying.
Which Dry Ice Blasting Machine Fits Your Workshop?
Match the machine to your job size, air supply, and mobility.
| Your Situation | Recommended Model | Why |
| Mobile service, small parts | YGMINI | 9kg handheld, 0-2m³/min air |
| General auto repair shop | YGP7X (Hot-Sale) | 10.5kg hopper, flexible feed |
| Heavy rust, large panels | YGA625 | 25kg hopper, up to 3.6kg/min |
| Continuous, high-volume work | YGT6 | Dual-motor drive, steady output |
| Detailing and EV shops | YGP8S | Permanent magnet motor, 25kg hopper |
One tip: check your compressor output first — the YGMINI needs 0-2m³/min, the YGA625 up to 8m³/min.
Get a Automotive Dry Ice Blasting Machine Quote
Dry Ice Blasting for Cars in Action — Real Workshop Results
Case: Auto Detailing Shop in Dubai, UAE — Engine Bays in Half the Time
A detailing shop cleaned engine bays with solvent sprays and brushes — two hours per car, and customers hated the smell. The owner found YG through a Google search in early 2025.
We recommended the YGP7X — a 10.5kg hopper lasted a full engine bay, and the adjustable feed handled both carbon and delicate wiring.
Results:
- Cleaning time cut from 2 hours to 50 minutes
- No chemicals — customers noticed the difference
- Added a $120 engine-bay service as new revenue
- Paid for itself in about 3 months
“We clean engines now without a single drop of water. Customers watch it happen and book on the spot.” — Omar A., UAE
Get a Automotive Dry Ice Blasting Machine Quote
Dry Ice Blasting Machine for Automotive FAQ
FAQ 1: How Much Dry Ice Does It Use?
It depends on the setting. Light powder cleaning uses about 0.01-0.08 kg/min; heavy rust removal runs up to 3.6 kg/min.
FAQ 2: What Size Air Compressor Do I Need?
Match it to the model. The YGMINI runs on 0-2m³/min, while the YGA625 and YGP8S want 3-8m³/min.
FAQ 3: Will Dry Ice Blasting Damage Paint or Trim?
No. The pellets shear off dirt without cutting the base material, so paint, chrome, and plastic stay intact.
FAQ 4: Where Do I Buy Dry Ice?
Most cities have a dry ice supplier for food or medical use — the same 2.5-3mm pellets work here.
FAQ 5: What Is the Delivery Time and Payment Term?
Standard models ship within 20-30 days after a 30% deposit; balance before loading. Sea freight: Southeast Asia 7-15 days, Africa 25-35 days.
Contact YG Machinery for a Factory Quote
Dry Ice Blasting Machine for Automotive — YG Machinery
YG Machinery manufactures dry ice blasting machines for automotive use worldwide — handheld and trolley units, plus spare nozzles, hoses, and hoppers. Workshops across Asia, the Middle East, Africa, and South America run YG blasters daily.
Every unit is factory tested and ships with English manuals, video training, and WhatsApp support. Tell us your cleaning job and compressor output — we’ll recommend the right model within 24 hours.
