Concrete Transfer Pump Sold to Spain: 15-18 m³/h, 80m Head

mobile pump concrete
mobile pump concrete
small cement pump
small cement pump

A Valencia contractor needed to pour concrete inside old-town buildings, and the truck-mounted boom pump could not get within 100 meters. That is how this concrete transfer pump project started. The job was simple on paper: place 12 to 20 m³ of structural concrete a day into courtyards, basements and narrow alleys. The streets in Ciutat Vella run 2.5 to 3 meters wide, with balconies overhead and nowhere to set up a boom. YG shipped a YG-30 trailer pump with 90 meters of pipe. Six months on, it has moved over 2,300 m³. If your sites look anything like this, we can spec the same setup for you.

Get Concrete Transfer Pump Quote

Concrete Pump Specifications: Five Models, 6 to 35 m³/h

Spec / ModelYG-10YG-20YG-30YG-40YG-50
Work efficiency6 m³/h12 m³/h15–18 m³/h20–22 m³/h35 m³/h
Motor power15 kW22 kW37 kW45 kW55 kW
Working pressure15/10 MPa18/12 MPa18/15 MPa23/15 MPa28 MPa
Aggregate size0.5–1.5 cm0.5–2 cm0.5–2 cm0.5–2 cm≤40 mm
Vertical / horizontal20m/50m40m/80m80m/100m120m/260m150m/300m
Pipe diameter80 mm80 mmΦ80(100) mmΦ100(80) mmΦ125/100 mm
Weight600 kg1,600 kg2,200 kg2,400 kg2,500 kg
Dimensions1800×700×1100 mm3400×1200×1600 mm3800×1500×1600 mm4000×1500×1550 mm4200×1700×1750 mm
Standard config10m pipe, 10m hose40m pipe, 10m hose90m Φ80 pipe, 10m hose120m Φ80 pipe, 10m hose—

The YG-30 sits in the middle of the range and became the Spain unit: 15–18 m³/h, 37 kW, 18/15 MPa, 80 mm pipe, 2,200 kg on a braked trailer.

Get Concrete Transfer Pump Quote

concrete transfer pump for sale
concrete transfer pump for sale
concrete lifting pump
concrete lifting pump

The Challenge: Why This Job Needed a Small Concrete Pump Machine

The contractor runs restoration and infill work in Valencia’s old town. Four constraints shaped the specification.

  • Street width 2.5–3 m. A 32-meter boom truck cannot enter, and it cannot set up on a slope with balconies overhead.
  • No crane access. Bucket placement needed a crane on the street, which the city council would not permit for a 12 m³ pour.
  • Mix design HA-25/B/20/IIa. Spanish structural concrete with 20 mm maximum aggregate. The pump had to pass it without segregation.
  • 400V 50Hz and CE marking. Spanish site insurance requires CE documentation and a manual in Spanish.

They were subcontracting boom pump call-outs at EUR 900 to 1,100 each, four times a week. That was EUR 3,600 a week leaving the business.

The YG Solution: A Portable Concrete Pumping Machine on One Trailer

We specified the YG-30 rather than the cheapest unit, because the numbers had to line up with their mix and their pipe run.

  • 37 kW motor, 400V 50Hz build, CE marked, Spanish manual
  • 90 m of Φ80 pipe plus a 10 m rubber hose
  • 18/15 MPa working pressure, enough for 80 m vertical or 100 m horizontal
  • 0.5–2 cm aggregate capability, matching the 20 mm mix
  • Braked trailer chassis at 2,200 kg, towable behind a 3.5 t van

A small concrete pump machine only pays off if it fits the street. At 3,800 mm long and 1,500 mm wide, this one parks in a single bay and rolls through a 2 m gate. A portable concrete pumping machine also has to be set up by the crew that pours, not by a specialist team, so we shipped a one-page priming sequence and a spare wear plate.

The delivery went FOB Qingdao to Valencia in 32 days, with CE documents and the Spanish manual in the crate.

Running Results: Concrete Transfer Pump Output on Real Pours

The first month settled the argument.

  • A 12 m³ slab in a covered courtyard took 48 minutes from priming to wash-out.
  • The longest run reached 80 m horizontal and 22 m vertical through a basement window, with no blockage.
  • Crew size dropped from five to three: two on the pipe, one at the hopper.
  • Wash-out takes 10 minutes with two sponges and a bucket of water.

Placement rate held at 16 m³/h on a standard HA-25 mix, which matched the mixer truck’s delivery rhythm. No waiting, no cold joints.

Get a Site Output Estimate

concrete portable pump
concrete portable pump
concrete pump mobile
concrete pump mobile

Six Months Later: Feedback and ROI on the Concrete Transfer Pump

ItemBeforeAfter
Boom pump call-outs4 per week0
Weekly pumping costEUR 3,600–4,400EUR 380 fuel and wear
Crew on pour day5 people3 people
Pours refused for access3 in the first quarter0

The contractor pumped 2,300 m³ in six months. At their internal billing rate of EUR 12/m³, that is EUR 27,600 of work the machine handled in-house.

The landed cost of the unit, freight and the first spares kit came to about EUR 19,000. Net of fuel, wear parts and operator time, the machine cleared its landed cost in month seven and now costs EUR 380 a week to run.

Their feedback was blunt and useful: “The only thing we changed was the pipe layout. We added two 45-degree bends instead of 90-degree elbows, and blockages stopped completely.”

Calculate My Payback

Core Advantages of the YG Concrete Pump

  • Real output, not brochure output. 15–18 m³/h on a 20 mm aggregate mix, measured on site, not on a test bench.
  • Fits where trucks cannot. 3.8 m long, 1.5 m wide, 2,200 kg on a braked trailer.
  • Long reach from one position. 80 m vertical and 100 m horizontal through 80 mm pipe.
  • Simple to run. Two levers and a hopper grate. A new operator primes it correctly on day one.
  • Serviceable anywhere. Wear plate, piston cups and seals are standard parts, not proprietary assemblies.
  • EU-ready. 400V 50Hz, CE marking and a Spanish manual ship with the unit.

Customization Options for Your Concrete Pump

Every site has one constraint that decides the spec. We build around it.

  • Voltage and frequency. 380V/400V/415V, 50 or 60Hz, to match your grid.
  • Pipe package. 30 to 120 m of Φ80 or Φ100 pipe, with bends, clamps and a hose.
  • Hopper and grate. Standard or widened for small mixers and wheelbarrow feeding.
  • Power source. Electric, or diesel for sites without a supply.
  • Chassis. Skid, two-wheel trailer or braked trailer with lights.
  • Documentation. CE files, Spanish, French or Arabic manuals.

Request a Custom Spec

pull behind concrete pump on highway site
pull behind concrete pump on highway site
towable concrete pump pipe inspection before work
towable concrete pump pipe inspection before work

Concrete Transfer Pump FAQ: 5 Buyer Questions

Q1: What aggregate size can it handle?

0.5–2 cm on the YG-10 through YG-40, and up to 40 mm on the YG-50. For a 20 mm structural mix, any model in the range works.

Q2: Can one person operate it?

One person can run the pump while two handle the pipe. Priming needs two hands, so plan for a minimum crew of two on small pours.

Q3: How far can it push concrete?

The YG-30 reaches 80 m vertical or 100 m horizontal. Add 90-degree bends and you lose roughly 3 to 5 m of reach per bend, which is why 45-degree bends matter.

Q4: What maintenance does it need?

Grease the hopper shaft daily, check the wear plate weekly, and replace piston cups when output drops below 80 percent of rated flow. A spares kit covers a year of normal use.

Q5: How long is delivery to Europe?

30 to 35 days to Valencia or Algeciras, including CE documentation. We ship FOB or CIF depending on your preference.

Buying a Concrete Pump: Talk to YG Machinery

Send us three things: your mix design, the longest pipe run, and the narrowest access point on site. We will tell you which model fits, what pipe package you need, and what it lands at your port.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Product Model:

    Your Name(required):

    Your Email(required):

    Your Phone(required):

    Your country:

    Your Whatsapp(required):

    Your Message(required):

    Scroll to Top